PRODUCT CENTER
Your location:
Homepage
/
/
SD series four-column hydraulic press
Number of views:
1000

SD series four-column hydraulic press

Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
Product description
Parameters

SD series four-column hydraulic press

Product introduction

 

The SD series four-column hydraulic press is composed of two parts: the host and the control mechanism. The main part of the hydraulic press includes hydraulic cylinders, beams, columns and liquid filling devices. The power mechanism is composed of a fuel tank, a high-pressure pump, a control system, a motor, a pressure valve, a directional valve, and the like. The hydraulic press is suitable for the pressing process of plastic materials. Such as powder product molding, plastic product molding, cold (hot) extrusion metal molding, sheet stretching, and lateral pressing, bending, turning, correction and other processes. The four-column hydraulic press has independent power mechanism and electrical system, and adopts centralized control of buttons, which can realize three operation modes of adjustment, manual and semi-automatic.

Functional characteristics

 

1. The power system is controlled by Hefu motor, which saves energy and reduces noise.
2. The motor runs intermittently, and the total energy saving is about 30%.
3. Reduce noise, noise reduction is about 20%.
4. The temperature of hydraulic oil is low, and the service life of hydraulic oil is prolonged.
5. The volume of the hydraulic station is small.
6. The machine has an independent power mechanism and electrical system, and adopts centralized control of buttons, which can realize three working modes of adjustment, manual and semi-automatic: the working pressure of the machine, the pressing speed, and the stroke and range of fast down and deceleration at no load. It can be adjusted according to the process requirements, and can complete the ejection process. There can be three process methods: ejection process and stretching process. Each process is fixed pressure. There are two process actions to choose from. The fixed pressure forming process is under pressure. With ejection delay and automatic backhaul. The function parameters can be set through the touch screen, and the man-machine interface is friendly.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Zibo Sangde Machinery Equipment Co., Ltd.

Service Online:

ADD:

Room 216, Building B, Pioneer Park, High-tech Zone, Zibo City, Shandong Province

copyright:Zibo Sangde Machinery Equipment Co., Ltd.       鲁ICP备13029597号-1       Powered by www.300.cn